Pantalla del producto
Categoria de producto
Contáctenos
Shandong Glasino Machinery Co.,Ltd.
Address: Building A-610 Mingliu Square, Changqing District Jinan City, Shandong, China
Teléfono: +86-531-87221996
WhatsApp: +86-15905314037
Email: sales@glasino.cn
Website: www.glasino.cn
máquina combinadora de láminas de vidrio y máquina de pre-calentamiento y pre-prensado de vidrio laminado curvado
Category:
Teléfono:
E-mail:
Descripción del producto
1. Structure
Consisted of 2 sets glass loader, glass conveyer, electric control system, pneumatic and vacuum system.
1.1 The glass loader is composed of lifting & inverting device with the reducer, inverting arm and folded cupules,
etc.
One set glass loader is located in cleaning powder section and another is in combiner section. The function is lifting
the upper glass to finish the cleaning powder and combing process. The frame is welded by the wugang’s standard
bar shape, the framework is screw-coattail slot, and the shell of the reducer is made of exact aluminum casting.
The glass conveyer is composed of frame, main conveyer, belts, cylinder, tensioner, etc. The glass conveyer carries
the glass to the working position exactly; cooperate with the loader to finish the combing. The belt is high strength
imported teeth-shaped & in-phase with the supporting block. The cupules have the director to suck the glass reliably.
The electric control system includes the control cabinet, PLC (Omron), frequency inverter (ABB), contactors
(imported) and the vacuum pressure switch (imported).
1.2
The pneumatic and vacuum system is composed of solenoid pilot actuated valve, vacuum valve, vacuum
pump, and cylinder, etc.
2. Working process
When the bent didymous glass transported on the conveying rolls in the cleaning powder section touches the
pressure switch, the position cylinder will raise the glass automatically. The loader with the vacuum cupules lifts the
upper glass. The operator cleans the silicate powder by cleaner, then control the loader put the glass back, the clean
glass will be transported to the combing position. When the glass arrives the right position and waiting for the
combing cylinder rising automatically, the loader lift the upper glass, the cupules suck another piece of glass. After
the operator cleaning the glass, placing the film, the loader puts the upper glass back and left the glass. The glass will
be transported to the rubber-covered position, the position cylinder will raise the glass, the operator trims the film
and fix the rubber ring, the combing is finished.
3. Main technology character:
3.1. Under controlled by PLC automatically in the full line.
3.2. The loader adjusts the speed by the frequency inverter, which is reliable and stable.
3.3 High efficiency, without the conveying by the operator, reducing the cullet rate the operator’s working intensity.
The control program is empoldered by us, which is reliable and stable.
4.(HJ-1713)technology specification:
Out size of the equipment:
7800 (the length can be design according the yield) x 3000mm
Power: 9 KW
MAX Size of the glass: 1750×1350mm
5. Machine General Layout
As attached.
Please note that this layout is only for your reference. When confirm the order, we will give you the final layout
according to your workshop layout.
6. Note for This Appendix
We reserves the right to revise the above parameters at the final engineering stage with the prior notice to customer,
as these parameters are derived from certain climate and geographic conditions, such as the
temperature, relative humidity and altitude, etc
JWY series continuous pre-heating pre-press machine for laminating glass is special in manufacturing safety glass in
architecture and autos. The glass is conveyed vertically through the machine.
1. Machine Structure
This machine consist of main frame, conveyor, heating & vacuum system, air circulation system and etc.. Conveyor
is driven by chain and inverter can adjust speed. The temperature is controlled automatically by control device.
2 Working Principles
Put the combined glass vertically on glass conveyor in loading section and plug vacuum rubber piper in vacuum
valve of the conveyor and open the valve. Glass moves along with the conveyor entering heating section stably for
heating and vacuuming. When glass temperature meet the setting temperature, most of the air will be exhausted
ensuring glass achieve ideal result. When glass is conveyed to the end of the conveyor, close the vacuum valve and
pull out the vacuum rubber pipe and unloading the glass from the ends. The whole process is finished.
3 Machine features
This machine has automatic temperature control device and the speed can be adjusted freely, which is suitable to
continuously working. It can be used under all kinds of natural environment with high producing speed and finished
product rate, and not affected by the local climate. Glasses are vertically conveyed, the machine use less space and
can work more efficiently.
This machine has features of advanced design, reasonable structure, nice outlook and expert layout, which ensure
safely and reliably running.
4 Technical parameters
JWY vertical type continuous pre-heating pre-press machine
Outline size: 11000x3610x3160mm (more or less)
Maximum glass size: 1750X1350mm
Productivity: 40-45pairs/h
Installed power: 260kw
Key words:
Mensaje
Shandong Glasino Machinery Co., Ltd. (el agente de Luoyang Auto Machinery Co., Ltd.) se estableció en 2003 y se especializa en la producción de hornos de templado de vidrio, máquinas de corte de vidrio, equipos de procesamiento de vidrio aislante y puertas y ventanas de aluminio y plástico. Equipo de producción.
Categoria de producto
Contáctenos
Shandong Glasino Machinery Co.,Ltd.
Dirección: A610, A915, Celebrity Plaza, distrito de Changqing, Jinan, provincia de Shandong
Teléfono: +86-531-87221996
WhatsApp: +86-15905314037
Fax: +86-531-87211521
Email: sales@glasino.cn
Website: www.glasino.cn
E-mail: